Daily Archives: 2024-07-22 [Monday]

Extra Content #10: Cleaning, Testing, and Filing Through-Hole Resistors and Capacitors | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I clean, test, and file a bunch of resistors and ceramic capacitors.

During this video I mention the Peak Atlas test instruments. I don’t own these yet, but they are on my wishlist!

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Dremel 335 Plunge RouterThis is an image of the product.notes

Let’s go shopping!

Unboxing #12: Unboxing and Demo of OULLX NSS-681HDMI-RJ45 Cable Tester from AliExpress | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I unbox the OULLX NSS-681HDMI-RJ45 Cable Tester from AliExpress and compare it with the Ampcom Automatic Network Cable Tester also from AliExpress.

OULLX NSS-681HDMI-RJ45 Cable TesterThis is an image of the product.notes
Ampcom Automatic Network Cable TesterThis is an image of the product.notes

Note that the Ampcom is advertised as the ANENG M469D on AliExpress, but that’s not actually what you get. The Ampcom model that you do get seems to work well enough, but I would recommend the OULLX NSS-681HDMI-RJ45 because it’s cheaper and can do HDMI in addition to Ethernet.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pc Titanium Plated Drill BitsThis is an image of the product.notes

Let’s go shopping!

New spot for Dremel

Posted on by
Reply

My Dremel used to be installed under my bench (the bench I call the “booth”). But it was a hassle to get it out when I needed to use it. So I have relocated it to a spot next to my main bench (the bench I call the “bench”). So far so good. With the benefit of experience I should be able to figure out the best way to route the power cable.

John's Dremel mounted to his shelf

p.s. I tried to find a new one of these Dremel wall mounts to purchase, but I couldn’t find one for sale anywhere… if you find one for sale somewhere, please do let me know!

My mat is screwed

Posted on by
Reply

I had a problem with my repair mat wherein it would slowly slide up the table. I had tried sticking it to the table with double sided tape, but the problem is the mat is very “non-stick”, nothing sticks to it. So I used two small screws to hold it to the table. Time will tell if the screws hold or not… (and yes, it *is* upside down… this is so that I can get my low component drawers out… :P)