Over time the joint on this holder comes a bit loose and I have to tighten it back up again. This time when I tightened it I dumped a whole tube of superglue in there. Hopefully that holds it!
I do put it under quite a bit of strain. In addition to holding the number pad for the booth, it also holds a bunch of my cables which I hang over it.
That red tape you can see I put there to stop the glue from leaking too much. I will remove that once the glue is dry.
I have ordered these component drawers and I have cleared a space on the pegboard for them to be installed. Interestingly I found what looks to be the same product selling on Amazon for AU$128 which is AU$86 more than I paid.
This post is part of my video blog and you can find more information about this video over here.
You can support this channel on Patreon: patreon.com/JohnElliotV
In this video I unbox an Ampcom Automatic Network Cable Tester from AliExpress. It was a bit confusing because the AliExpress page says this is an ANENG M469D. But actually it’s not. It’s an Ampcom Automatic Network Cable Tester, which is a similar bit of kit. In the video I test this equipment with both a normal patch cable and a crossover cable and it seems to work okay, so for five bucks I’m a happy customer.
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
JST XH2.54 6pin Pre-crimped Connector |
Let’s go shopping!
This was good: How a 555 Works as a Timer.
This post is part of my video blog and you can find more information about this video on this show’s homepage.
You can support this channel on Patreon: patreon.com/JohnElliotV
Silly Job Title: Amp Alchemist
Note: this video is nearly five hours long! If you’re interested but don’t have 5 spare hours (and who does??) you might like to listen at 2x speed or more. The standard YouTube interface only supports playback up to 2x speed but I have some notes about YouTube hacks you can use to set the playback at 3x speed… or more!
In this video I teardown “Radio Engineering” (3rd edition) by Frederick Terman published 1947.
Frederick Terman was a Doctor of Science which is what the Sc.D. after his name stands for. It’s like a Ph.D. He is remembered as a father of Silicon Valley.
In the book there is much talk of diodes, but of course that is in reference to the old thermionic diodes which were vacuum tubes. These days diodes are semiconductors made from something like silicon or germanium.
The book talks a lot about power amplifier classes. Today the same classes are still used, it’s just that anything other than class AB and class D are very uncommon.
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Scotch Titanium Scissors notes |
Let’s go shopping!
I found this great video on YouTube today. It explains in great detail how a switch mode power supply works.
This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.
You can support this channel on Patreon: patreon.com/JohnElliotV
In this video I tell you about the SWAG (Stuff We All Get) I collected this year at ElectroneX.
I had the very good fortune to meet Dave Jones of EEVblog fame. He was nice enough to take a photo and mention my channel on X.
And as if things couldn’t get any better I then went on to meet Nicholas Vinen of Silicon Chip fame. For the record, the very first thing I ever said to Nicholas Vinen was: “is that a spectrum analyzer?” :P
I mention that the channel’s logo a version of the Hacker Emblem. There’s more info on the show’s website.
My business cards were designed by DAC Design and printed by ClickMedia.
My business card holder is this one: Business Card Holder, 1 Pcs Build in 40 Card Slot PU Leather Business Card Wallet for Credit Card, Business Cards, Men, Women (Black).
The companies who gave me SWAG that I mention in this video are:
I mention my One PCB to Ruler Them All from Adafruit which is part of my costume.
The cheap wire cutters I mention are these ones: Aokin1PC 170 Universal Pliers DIY Electronic Diagonal Side Cutting Nippers Wire Cable Cutter 3D Printer Parts Hand Tools.
As I suspected J.Burrows is a stationary brand. Must have stolen someone’s pen! Whoops! :P
You can read more about Pogo pins. I’ve never used them myself. Looking at them I’m not sure how you would mount them to a board. Lot’s of things to learn!
You can find more info about the probe tweezers I mention in the video over here: Yum Cha Probe Tweezers.
My cheapo multimeters are these ones: DT830B Digital Multimeter. My slightly less cheapo multimeter is this one: DigiTech QM1323 Multimeter. The multimeters I am saving my pennies for are these ones:
Check out the line of Peak test instruments. When I’m rich I am gonna get the full set!
My capacitor testers (and discharger) I mentioned are these ones:
You can find more about my Maxitronix Xin1 Kits. I am making videos as I work my way through them.
You can find the STM micros I showed you over here:
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
FNIRSI DC580 Power Module |
Let’s go shopping!
My friend @dcz_ on IRC referred me to this one: Using an Inverting Regulator for Buck/Boost DC-to-DC Voltage Conversion.
You might already know that I have the full set of Maxitronix Xin1 kits, but here are some photos of me unboxing my 200in1 so I could send some pics to my mate Dave Jones:
Well. Wow. What a day!
Today was the opening day of ElectroneX in Sydney.
I had the great privilege of spending the day with my very good friend Aleksei. Between us I think we managed to talk to every single exhibitor. By the time I got home my legs were sore and my lips were parched, so much walking, standing, and talking!
I turned up in character. I wore my costume. A lot of people thought that was fun, as did I. :)
I met Dave Jones of EEVblog fame, which really made my day. I knew he would be there and I was really hoping to see him, and I did! He was nice enough to plug my channel, what an excellent human being! <3
And as if things couldn’t get better they went on and did! It was an honour and a privilege to meet Nicholas Vinen, the editor of Silicon Chip magazine. I had hoped that he would be there and I would run into him… and then he was and I did!
All round a super great day. I had a lot of fun, learned a few things about the state of the art, and I even netted a few new subscriptions on the channel. :)
