Category Archives: Internet

Mail Call #5: Loot from Amazon and AliExpress! | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take a quick look at a few cheap bits and pieces I picked up from Amazon and AliExpress recently.

The stuff I got from Amazon was:

The stuff I got from AliExpress was:

I’ve got some more loot on order, so stand by for another mail call video soon!

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this before purchasing from Amazon, eBay, or AliExpress is a great way to support the channel at no cost to you. Thanks!

Arlec PB91 Plug-In RCD Safety Switch With Surge ProtectorThis is an image of the product.notes

Let’s go shopping!

Symbol Keyboard | Mini Project JMP001 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

This is the inaugural Mini Project! I introduced the Mini Projects recently. They are developed and published by Silicon Chip magazine, and sponsored by Jaycar Electronics (which is an Austrlaian electronics store, similar to Radio Shack in the USA, hopefully it doesn’t end up suffering the same fate.)

In this project, codenamed JMP001, we develop a USB keyboard which can send interesting and unusual symbols (which aren’t usually available on a keyboard) to a Windows computer using the alt-codes that it supports in a typical codepage.

For this first Mini Project I felt it was important to actually buy my components from Jaycar which I did for roughly eighty Australian dollary doos. Approximately US$50. The parts I ordered were these:

Belatedly I did also search for rubber feet.

There was quite a lot that went into the production of this video, and we accumulated a lot of links. Those are here:

In the end this first project was relatively successful, and we did get it to work fairly well on one of my Windows computers. As for the rest you can find out for youself in the video!

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha HSC8 6-4A Ferrule Crimper KitThis is an image of the product.notes

Let’s go shopping!

Introducing Silicon Chip and Jaycar Mini Projects | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I introduce the new Mini Projects feature, wherein we will be building the Mini Projects published by Silicon Chip magazine and sponsored by Jaycar Electronics.

There is a page on my wiki for recording progress: Mini Projects.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha SpudgersThis is an image of the product.

Let’s go shopping!

Electronics Project #7: ICL8038 Monolithic Function/Signal Generator Kit Build and Test | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Buzz Boss

In this video I build and test this kit I purchased from AliExpress: ICL8038 Monolithic Function Signal Generator Module Sine Square Triangle Signal Generators DIY Welding Practice Kit.

My notes are on my wiki: ICL8038.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Swann & Morten Handle For No. 10 10A 11 15 15A Scalpel HandleThis is an image of the product.

Let’s go shopping!

Mail Call #4: More Loot from AliExpress and eBay! | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I receive the following equipment:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

RELIFE RL-007GA Solder LugsThis is an image of the product.notes

Let’s go shopping!

New Book Teardown #5: Electrical Engineering 101 3rd Edition (2011) | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take a look at Electrical Engineering 101: Everything You Should Have Learned in School…but Probably Didn’t 3rd Edition written by Darren Ashby and published in 2011.

In the book the author mentioned that they used to write for chipcenter.com which appears to have since been taken over by EE Times. ChatGPT provided more information.

The author also mentioned Mathcad. I’m planning to check that out over here: https://www.mathcad.com/

And some terms which came up (ChatGPT explains further):

Vcc
Voltage at the collector
Vee
Voltage at the emitter
Vdd
Voltage at the drain
Vss
Voltage at the source

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pcs Releasable Cable OrganizerThis is an image of the product.

Let’s go shopping!

Mail Call #3: Even More Cheap Stuff from China! Thanks AliExpress! | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I open up another bag of stuff I ordered from AliExpress during their recent sale.

This is the bulk stuff I cover in this video:

And this is the equipment I cover in this video:

Yum Cha 3pcs Drill Scrub BrushThis is an image of the product.notes
Yum Cha 6pcs Wire BrushThis is an image of the product.notes
Yum Cha 10pcs Blue Microfiber ClothThis is an image of the product.notes
Yum Cha 10pcs Magic Foam SpongeThis is an image of the product.notes
Yum Cha Universal Handheld Wire StripperThis is an image of the product.notes
Yum Cha 4pcs 30mm Deep Hole PenThis is an image of the product.notes

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Oloey Safety GogglesThis is an image of the product.notes

Let’s go shopping!

Extra Content #11: Cleaning Rust Off Handheld Wire Stripper Using Dremel Rotary Tool and WD-40

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I clean the rust off my new Yum Cha Universal Handheld Wire Stripper using my Dremel 4300 Rotary Tool and WD-40 Specialist High Performance Silicone Lubricant.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

YIHUA 938D Soldering TweezersThis is an image of the product.notes

Let’s go shopping!