Electronics Project #19: Attaching Alligator Clips to AA Battery Holders | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Chief Engineer. I am the Chief Engineer!

In this video we attach some alligator clips to a handful of AA battery holders. I was planning to use these for a Learning the Art of Electronics experiment that I didn’t understand, but now that I understand the problem a bit better I don’t want to go short-circuiting five AA batters… that would be a bad idea!

We use the METCAL PS-900 Soldering Station for soldering.

We use the MUIN Solder Fume Extractor to clear the air.

We use the EEVblog BM2257 Digital Multimeter for voltage and continuity testing.

We use the Hakko CHP 3C-SA Precision Tweezers for tweezering.

We use the Plato Model 170 Wire Cutter to snip, snip, snip.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 4pcs 30mm Deep Hole PenThis is an image of the product.notes

Let’s go shopping!

Old Book Teardown #15: Encyclopedia of Electronic Circuits Volume 2 (1988) | In The Lab

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Digital Dancer. I am the Digital Dancer!

In this video we have a look inside Encyclopedia of Electronic Circuits Volume 2.

Circuits of particular interest were:

Page Circuit
3 Differential Voltage or Current Alarm
33 Low-Cost Chime Circuit
34 Sliding-Tone Doorbell
109 Demonstration Comparator Circuit
151 Crystal Tester
274 Precise Wave Generator
321 Back-Biased GaAsP LED Operates as Light Sensor
341 Magnetometer
566 Modified UFT Relaxation Oscillator Produces Clean Audio Sinusoids

Some notes concerning things which came up:

SCS = Silicon-Controlled Switch: an SCS (Silicon-Controlled Switch) is a four-layer thyristor device — basically an SCR with an extra gate — that gives you extra control (including a way to force it off). It’s a member of the thyristor family used for controlled switching in low-power applications.

Ga = Gallium.

As = Arsenic.

P = Phosphorus.

Compander = compressor + expander. It’s a system (or device) that compresses the dynamic range of a signal before transmission or storage and then expands it back to (approximately) the original dynamic range at the receiver/playback end.

The NE570 / NE571 (and SA571) are dual compandor ICs: each chip contains two identical compressor/expander “kits” (full-wave rectifier → temperature-compensated variable-gain cell → op-amp + trim) used for dynamic range control and noise-reduction in audio/communications systems. They’re widely used as companders, VCAs, limiters/noise-gates and as the compressor/expander around BBD delay lines to reduce hiss.

β (beta) — also written hFE or hfe on datasheets — is the transistor’s current gain. For a bipolar junction transistor (BJT) it’s the ratio of collector current to base current: β = IC / IB.

Q (quality) factor: measures how selective or sharp a resonant system is. High Q → narrow bandwidth, slow damping (lots of ringing). Low Q → wide bandwidth, heavy damping (quickly dies out).

I asked ChatGPT to please explain damping and ringing.

The 5558 IC is a dual op-amp in the 1458/1558 family (often labelled LM1558 / MC1558 / 5558 depending on maker). These are general-purpose, internally-compensated dual operational amplifiers (audio, filters, integrators, buffers).

My programmable load is the ZKETECH EBD-A20H Electronic Load.

SCA = Subsidiary Communications Authorization / subcarrier (used for background music/data in FM radio broadcasting).

We encountered Chebyshev filters which are analog or digital filters that have a steeper roll-off than Butterworth filters, and have either passband ripple (type I) or stopband ripple (type II).

UJT = Unijunction Transistor, a three-terminal semiconductor device (Emitter E, Base1 B1, Base2 B2) with a single PN junction and an internal resistive path between B2 and B1. It’s widely used as a simple relaxation-oscillator/timing/trigger device because it shows a controlled negative-resistance region when the emitter is driven above a threshold.

PUT = Programmable Unijunction Transistor; a PUT is a three-terminal semiconductor device (Anode, Cathode, Gate) that behaves like a unijunction transistor but whose trigger (peak) point is set externally by resistors — i.e. it’s programmable. It’s essentially a four-layer PNPN device (closely related to SCRs in internal construction) with the gate used to set the firing threshold.

My anti-static monitor is an Auto-alarm Anti Static ESD Wrist Strap Tester Output Anti-static Online Monitor For Anti-static Electronic ESD Meter.

A squib is a small explosive which can be used as a detonator.

A “TR circuit” can mean variously:

  • a T/R (transmit–receive) switch used in RF systems
  • a transformer-rectifier (TR or TRU) — a transformer plus rectifier used for AC→DC power
  • Tr often used as an abbreviation for rise time (tᵣ) when discussing pulse/transient performance

SSB = Single-SideBand — a form of amplitude modulation where the carrier and one of the sidebands are removed so only one sideband (upper or lower) is transmitted.

The 2N4871 is a classic silicon PN unijunction transistor (UJT) used for timing/oscillator and trigger circuits.

RTD = Resistance Temperature Detector, a temperature sensor that measures temperature by sensing the electrical resistance of a metal element, which changes predictably with temperature. RTD stands for Resistance Temperature Detector.

A Theremin is a type of musical instrument.

The 4069 is a hex inverter.

The 4046 is a Phase-Locked-Loop.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yizhan Digital MicroscopeThis is an image of the product.notes

Let’s go shopping!

Learning the Art of Electronics: Fig-1N.32: various senses of “ground” | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Energy Elicitor. I am the Energy Elicitor!

In this video we keep on working through Learning the Art of Electronics chapter 1N DC Circuits.

There was no experiment recorded today due to time constraints. The new material covered was just a little bit regarding ground, the rest was revision. We will continue next Tuesday so stand by for that.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Precision Disassembly Screwdriver Kit With SpudgersThis is an image of the product.

Let’s go shopping!

Old Book Teardown #14: Encyclopedia of Electronic Circuits (1985) | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Tome Pumper. I am the Tome Pumper!

In this video we take a look inside the Encyclopedia of Electronic Circuits.

The pages which have circuits I thought were interesting and will consider building are: 358, 415, 420, 520, and 597.

Here are the pages I scanned while working through the book:

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 3pcs Universal Metal SpudgersThis is an image of the product.

Let’s go shopping!

The Electronic Storage Tank | Project 2/30 | Maxitronix 30in1 | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Tech Lead. I am the Tech Lead!

In this video we do the 2nd project from the Maxitronix 30in1 Electronics Project Lab Kit: The Electronic Storage Tank.

We use the Rigol MSO5074 Mixed Signal Oscilloscope to measure the voltage across the capacitor.

We use the UNI-T UTi260B Thermal Imager to check for thermal response (there was none).

We use the Riden RD6006 Bench Power Supply to provide 3V to our test circuit.

We use the EEVblog BM2257 Digital Multimeter to measure voltage across the capacitor.

We use the Peak Electronic Design Atlas DCA75 Pro Semiconductor Analyzer to measure the forward voltage of our LED.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Rigol PLA2216 Compatible Logic ProbeThis is an image of the product.notes

Let’s go shopping!

Learning the Art of Electronics: Fig-1N.29: DVM reading departs from ideal; we can infer Rin-DVM | In The Lab

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Systems Architect. I am the Systems Architect!

In this video we keep on working through Learning the Art of Electronics chapter 1N DC Circuits. Today’s circuits are from Figure 1N.25: Set of similar voltage dividers: same Vthev, differing Rthev and Fig-1N.29: DVM reading departs from ideal; we can infer Rin-DVM.

We use the Tenma 72-10505 Bench Power Supply for a 20V power supply.

We use the EEVblog BM2257 Digital Multimeter as our DVM for measuring voltage.

We use the Sharp EL-546L Scientific Calculator to crunch some numbers.

We use the Multicomp Pro MP701033 Resistor Decade Box to provide the resistances used in our circuits.

We use the WilliamKlein Music Stand to hold our textbook.

We use the Carpenter Mechanical Pencil to make our notes.

We use the Hakko CHP 3C-SA Precision Tweezers for precision work.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

OULLX NSS-681HDMI-RJ45 Network Cable TesterThis is an image of the product.notes

Let’s go shopping!