1-Transistor Radio With Diode | Project 6/10 | Maxitronix 10in1 | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the sixth Maxitronix 10in1 Electronic Project Lab project: 1-Transistor Radio With Diode.

Thanks very much for watching! And please remember to hit like and subscribe!


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

SUNSHINE Hard Brush SetThis is an image of the product.notes

Let’s go shopping!

1-Transistor Radio | Project 5/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the fifth Maxitronix 10in1 Electronic Project Lab project: 1-Transistor Radio.

This is the second radio circuit and just like the previous radio circuit I wasn’t able to make this one work either! But at least this time I did get some static noise out of the circuit, which was better than the “nothing” which I got out of the previous circuit.

Also, I did learn how to setup a frequency measurement on my oscilloscope: Measure -> Add -> Freq. Easy peasy! :)

Thanks very much for watching! And please remember to hit like and subscribe!


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Scotch Titanium ScissorsThis is an image of the product.notes

Let’s go shopping!

Diode Radio | Project 4/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the fourth Maxitronix 10in1 Electronic Project Lab project: Diode Radio.

This experiment is a little disappointing, I couldn’t make it work in the end.

But I did learn not to leave my coffee cup on my project mat because it interferes with the thermal cam!

Thanks very much for watching! And please remember to hit like and subscribe!


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

FNIRSI DC580 Power ModuleThis is an image of the product.

Let’s go shopping!

Standard Aussie home television aerial RF coaxial connector

Man I had a lot of trouble figuring out what these things are called. I can tell you that they are not called F-Type, BNC, SMA, N-Type, or PL-259 connectors. In the I end I asked about this and learned these connectors are called Belling-Lee connectors, also known as IEC 169-2 Female/Male. But if you search for “IEC connector” (which these things are apparently sometimes called) you will only find the power adapters, not these aerial connectors.

Old Book Teardown #4: The Internet With Windows (1996) | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Charge Charmer

This video is part of the New Book Teardown feature of my video blog.

In this video I tear down The Internet With Windows by Glyn Moody. This book was published in Great Britain in 1996 and is about accessing various Internet services using Windows 95 and Windows 3.1.

Thanks very much for watching! And please remember to hit like and subscribe!


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

3ELIGHTING 14″-27″ With 2 Arms VESA Wall MountThis is an image of the product.

Let’s go shopping!

New computer ‘trail’

I have built a new computer ‘trail‘ out of my old workstation ‘tradition‘. I was able to do this because I migrated the VirtualBox VMs that were running on ‘tradition’ over to QEMU/KVM VMs now running on ‘lore‘.

My new computer ‘trail’ is setup as the recording workstation for the “booth” in my studio. This is good because now I can record at 4K in the booth!

I don’t use Windows much these days but this new studio workstation runs Windows 11 Pro. I haven’t used software RAID on Windows before but for this workstation I setup a RAID1 mirror using 2x 2TB NVMe drives. I was able to configure the block size for the NTFS file system so I picked 2MB (which was the maximum) as this RAID array will only be for storing video recordings (which are huge files).

New Book Teardown #1: The Art of Electronics 3rd Edition (2015) | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Charge Charmer

This video is part of the New Book feature of my video blog.

In this video I review the venerable The Art of Electronics 3rd Edition by Paul Horowitz by Winfield Hill published in 2015. This monstrous tome includes some 1,220 pages.

This is a long video, because this is a long book!

While I was writing up these notes for the video I found a wealth of fun stuff. Here are a few links:

Thanks very much for watching! And please remember to hit like and subscribe!


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Plato Model 170 Wire CutterThis is an image of the product.notes

Let’s go shopping!

Passing myself off as respectable

There’s been a little bit of spring cleaning around here today!

I’m trying to get my house in order so I can pass myself off as respectable when I start promoting my new show In The Lab With Jay Jay in earnest.

To that end I have reviewed the look and feel of my wiki. It no longer has that black, green, and orange monospaced font vibe going on, but now uses the relatively unoffensive default theme.

It’s not using the latest Vector theme, but rather the legacy one. This was deliberate because I have a lot of big tables in my wiki (such as on my computers and shopping pages) and the legacy theme plays nicer with those.

I’ve also been tweaking the website for my show, including an updated about page.

The blog, the wiki, and the show also now all use my new favicon which is my take on the Hacker Emblem:

John's new icon, based on the Hacker Emblem