The bench multimeter I use in this video is my OWON XDM1041 and the bench power supply is my RIDEN RD6006.
The demo circuit used a 1KΩ 1/4W resistor, a 25V 330μF electrolytic capacitor, and an 18V supply.
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
They are exactly the same product so if you’re planning to purchase might as well get the cheapest option. Note that the first link above also has a separate more expensive option which is actually a different product, I didn’t get one of those.
In addition to unboxing these third hands I also add some 4mm heat shrink to the alligator clips to take the bite out of the teeth.
Note: in this video I have the annoying habit of calling “heat shrink”, “shrink wrap”. The correct term is heat shrink, shrink wrap is a different type of thing.
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
In this video I solder three different sized bodge wires onto some perfboard for practice and for the purpose of exposition. After attaching the three bodge wires I cover them with UV solder mask.
If you haven’t heard of the expression “bodge wire” before, ChatGPT will explain.
I want to thank my mate Bruce from Branchus Creations for recommending the enameled wire of various sizes, the Swann Morton blades, and the Amtech flux.
I got three rolls of this enameled copper wire from AliExpress:
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
In this video I recap an old OGXbox. I also redo the thermal paste. I use my Pro’sKit SS-331 desoldering pump in anger for the first time. I spend an inordinate amount of time trying to figure out my new tools. In the end the Xbox is still broken!
I sold this Xbox on eBay but it was returned to me during the warranty period (one month) as it was faulty.
In this video I mention a trick you can do in your browser when you’re watching videos on YouTube. Ordinarily the YouTube user interface only allows you to set playback speed to 2x, but if you want to set it at 3x or higher you can do so by pressing F12 to bring up developer tools, then open the Console, and enter this code:
In this video I mention that it was in a video from Bruce from Branchus Creations that I got the recommendation to try a beveled soldering iron tip. Having given it a bit of a go and not really having great luck with it I am going back to a small chisel bit instead.
I comment in the video about how you don’t need to replace the clock capacitor on a v1.6 board, but Harcroft on the ConsoleMods.org original-xbox Discord forum reminded me that sometimes you do need to replace this capacitor.
The capacitors I use for this recapping are Chong 6.3V 3300μF Low ESR caps. Of course the board didn’t work after recapping so it’s possible these are dodgy caps.
I’m pretty sure I did damage the tip on my desoldering pump by putting the temperature all the way up to 480°C. Maybe don’t do that yourself. I believe anything over 380°C can damage iron tips (basically they melt!).
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
I made a few mistakes with the production of this video, sorry about that. I made a mess of the side branding, I will have that fixed in future. And I managed to get my toes on camera. The height of professionalism!
Note: in the video I’m not sure what “ROI” means, but it turns out it means “region of interest”. The region of interest is a box in the middle of the display, and some settings apply to this area.
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
In this video I unbox my new NBD Camera. It’s cheap and terrible. I mounted it with an Arkon Wall Mount. In a future video I will demo my new camera setup. After we’ve done that we will replace the batteries in my friend’s hair trimmer. Riveting stuff! Stay tuned!
Note: I was confused while making this video, I thought the camera was a “HBD” camera, but it’s an “NDB” camera, and you will see me getting that wrong. Not a super important detail…
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
In this video I make an input power cable for my ZKE Tech EBD-A20H Battery Tester and Electronic Load. This power cable connects a DC female input to four male banana plugs, two positive, two negative. This power cable can be used to connect a power source for testing by the EBD-A20H.
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
I was watching EEVblog #168 – How To Set Up An Electronics Lab and Dave suggested using chisel tips instead of conical tips, which inspired me to check what I was using and also to sort the tips I presently own into three categories:
Chisel tips
Other tips
Conical tips
If you’re interested in soldering temperatures I wrote a follow-up post on that topic: soldering iron temperature.
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Thanks very much for watching! And please remember to hit like and subscribe!
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
