Category Archives: In The Lab With Jay Jay

Interlude #1: Mail Call! Cheap Stuff From China! | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Science Officer

Today we’re gonna take a look at what arrived recently from AliExpress. They were having a sale so I purchased some natty tools and a few consumables. Details below. I made some notes at the time of purchase if you’re interested in what I paid for this stuff.

In the video I refer to the workstation I am planning to buy for the studio. When I get this new computer I should be able to improve the quality of my YouTube videos. If you’re interested in the details the new computer I’m planning is ‘victory‘. In the video I say this new computer will cost me AUD$6,000, but it’s looking like it will cost more like AUD$7,500 (roughly USD$5,000), so I will have to save my pennies! The Dell OptiPlex computer that I am presently using is ‘wonder‘.

In the video I refer to “box openers”. If you know what these things are actually called, please do let me know!

The spider who popped up on my bench during the recording of this video was found later. He, um, didn’t make it…

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Sudake SDK08 Test ClipsThis is an image of the product.notes

Let’s go shopping!

Unboxing #9: Unboxing of Sudake SDK07 and SKD08 IC Clip SMD Gripper Test Probe | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Hack In Residence

Today: another unboxing video! This time we’re taking a look at the Sudake SDK07 and SKD08 IC clips / SMD grippers / test probes.

Originally I was going to demo these things in this video too, but the test circuit took like two hours to make, and then when I turned it on it didn’t even work, so I cancelled that and now this is just an unboxing video and not a demo. Stay tuned for the demo which I will do, just when I can find some more time.

These test clips are really great, they let you attach a probe to the foot of an integrated circuit or a surface mount device.

Be warned: there’s a bit of swearing and bad language in this video. What can I say? I’m just a passionate individual, ya know? :P

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pcs Releasable Cable OrganizerThis is an image of the product.

Let’s go shopping!

Unboxing #8: Unboxing of Mini Classic Game Console | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Power Provider

It’s the In The Lab With Jay Jay Halloween Special! This evening: another unboxing video! This time we’re taking a look at my retro gaming console: The Mini Classic Game Console. Complete with 620 odd games!

I picked this thing up at Vinnies (the thrift store) for fifteen Aussie buckaroos.

The main circuit board looks like this:

I found the S71PL256NC0HFW5U2 which is a 64Mb flash memory. The details of the other circuitry was obscured.

Here is the list of games on this thing:

And this is the manual:

I managed to get this thing wired through an AV to HDMI adapter, then a HDMI to USB adapter, so in the last half of the video you can see me demoing a few of the games and scrolling through the full list of games.

Oh, and in this video I read “NTSL” on the manual and say “they got that wrong, it’s NTSA”, but *I* got that wrong, and it’s “NTSC”. The American video standard. In Australia almost everything is PAL.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

aToolTour Black Hexagon Deburring Drill BitThis is an image of the product.notes

Let’s go shopping!

Unboxing #7: Unboxing of FILCO Majestouch 2SS Edition 104-key and tenkeyless keyboards | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Sparky

Happy Halloween! Today: another unboxing video! This time we’re taking a look at my two new mechanical keyboards from FILCO (affiliate links):

As I mention in the video I usually like to purchase my mechanical keyboards from WASD Keyboards in California. They make excellent keyboards but just a bit too pricey for me at the moment. Instead of purchasing from WASD Keyboards I picked these keyboards up from Amazon Australia and I paid AU$202.55 (US$130) for the 104-key keyboard and AU$188.89 (US$120) for the 87-key keyboard which was roughly half of what I would have had to pay if I purchased from WASD Keyboards.

Both of these FILCO Majestouch 2SS Edition keyboards come with Cherry MX Speed Silver switches. If you’re into mechanical keyboards definitely give these switches a try; now that I’m used to them I will accept nothing less.

It was a bit disappointing that while doing the unboxing I discovered some of the keys had fallen loose during shipping. I have since plugged in and tested the keyboard (I’m using it now in fact) and everything seems to be working okay, so no harm no foul.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Miniware DT71 Digital TweezersThis is an image of the product.notes

Let’s go shopping!

Unboxing #6: Unboxing of K-CEVE AM-KVM401-K and KC-KVM401A 4-port HDMI KVM switches | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Current Commander

Today: another unboxing video! I do these, not because I think that my regular viewers are going to be particularly interested, but because you really only get the opportunity to do these on the day that new equipment arrives, and I figure it might be helpful for people who search for unboxing videos for a particular product, so they can see what’s in the box before they make a purchasing decision.

This video is an unboxing of two different 4-port HDMI KVM switches. I would give you affiliate links but these don’t seem to be available in the USA, so here are the non-affiliated Amazon Australia links:

For the record I paid AU$64.56 for the AM-KVM401-K (US$40) and AU$84.14 for the KC-KVM401A (US$55). I don’t know what algorithm is in charge of pricing at Amazon but the prices seem to have gone way up since I purchased these things two days ago, now the AM-KVM401-K is AU$75.96 and the KC-KVM401A is AU$98.99, so not sure what’s up with that (but I do NOT like the idea that Amazon has a pricing system that isn’t offering all shoppers the same price all the time, which this smells like).

I reckon the K-CEVE marketing department is going to bit pretty upset with engineering or manufacturing about this, but when I was unboxing the AM-KVM401-K the front panel push button switch just dead set fell out! That’s gotta be embarrassing for someone.

Having done the unboxing I’ve decided I’m gonna try the larger KC-KVM401A unit first. Its larger size is a disadvantage but I like the fact that it has USB-A instead of USB-C inputs and I’m also happy that it has a dedicated 5V power rail, the AM-KVM401-K is powered off the USB bus which is less desirable.

I will post another article later to let you know how I went when I actually plug these things in, which I haven’t actually done yet.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha TE-801 Third HandThis is an image of the product.notes

Let’s go shopping!

Electronics Project #1: ALKOY Capacitor Discharge Pen Teardown | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Electron Herder

This video is a teardown of the ALKOY Capacitor Discharge Pen which I did for YouTube user t1d100 who asked me about it over here: Demo of the ALKOY Capacitor Discharge Pen | In The Lab With Jay Jay.

I made a bunch of mistakes while making this video, so please bear with me. I tried to add some captions to explain things when I went wrong.

The discharge pen that I have was purchased from Amazon Australia here: 1000V Portable Capacitor Discharge Pen High Voltage Quick Discharging Tool Constant Discharge Pen Electronic Repairs Discharge Pen ALKOY.

There seems to be a similar product available from Amazon USA here: YEKMLCO Capacitor Discharge Pen Fast Discharging High Voltage 1000V Repair Tool Discharger for Electronic Safety Intelligent (affiliate link).

In the video you can watch me break this thing open. I didn’t exactly know how to do it, and I permanently damaged the device while opening it. In the end I wasn’t 100% sure what the safe and proper way to open these things really is. Giving it a mighty pull might work, otherwise you will need to leverage off some friction locks.

Before I broke the device open I tried to measure the resistance across its probes, but all three measurement devices reported open circuit. The device doesn’t seem to engage the resistor until it detects a voltage.

Eventually I got the device open, you can see some photos of the circuit board below, and I make some attempt to identify the components.

The MB10F on the top is a bridge rectifier, the M7F in the middle is a rectifying diode, and the resistor at the bottom is 2MΩ. In the video I say that the resistor is a “two ohm resistor”, but it is actually a “two MEGA ohm resistor” (I knew that, I just misspoke).

I’m not 100% sure what the CS01N100 A3R is, but it seems than an CS01N100 A4R is a silicon N-Channel Power MOSFET, so I think that’s probably what that is.

As I broke this device during the teardown I have purchased myself a replacement device for AU$23.02.

In the video I use the following equipment (affiliate links where possible):

Mini Digital Tweezers Miniware DT71 Mini Digital Tweezers Smart SMD LCRDVF Tester Multimeter Signal Generator for Measuring Components
SMD Digital Tweezers UNI-T UT116A Digital Tweezers Smart SMD Tester Electrical Multimeter Resistance Capacitance Continuity Diode Test Meter
Component Tester FNIRSI DSO-TC3 Digital Oscilloscope Transistor Tester 10MS/s Sampling Rate 500kHz Bandwidth Support Diode LCR Detect Signal Generator
Soldering Station Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles & Tweezer Set
Mini Screwdriver Set Legion Tools Precision Mini Screwdriver Set 11pc Jeweller Laptop Phone Watch Repair Tool
Repair Mat Kaisi Heat Insulation Silicone Repair Mat with Scale Ruler and Screw Position for Soldering Iron, Phone and Computer Repair Size: 13.7 x 9.8 Inches
Desoldering Pump Kaisi Professional Solder Auxiliary Tool 6 piece double-sided repair tool with Desoldering Wick & Desoldering Pump
Craft Knife Precision Craft Knife Set 52pcs Professional Razor Sharp Knives for Art, Hobby

In the video I have trouble with the connections into the DSO-TC3, the connections are documented here: FNIRSI DSO-TC3.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 52 in 1 Tiger WrenchThis is an image of the product.notes

Let’s go shopping!

Channel News #1: Stetmann Cosplay Costume Reveal | Learning Electronics In The Lab With Jay Jay

Posted on by
2

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Craig Entertainer

Here it is! As planned, my new costume! Just for fun when I record electronics videos in my lab I’m gonna dress myself up like Egon Stetmann the scientist from StarCraft II:

The cosplay costume reveal is in this video. Also some news and discussion about the goals for the channel over the longer term.

As mentioned in this video I will have a new job title for my ID card for each video. The inaugural job title is Craig Entertainer, for my only regular reader, Craig. :)

Here are some affiliate links to the bits and pieces I got for the costume:

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

aToolTour Extra Long Magnetic Drill Bit ExtensionThis is an image of the product.notes

Let’s go shopping!

Early Content #11: Demo of the ALKOY Capacitor Discharge Pen | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I demo my new ALKOY Capacitor Discharge Pen.

The bench multimeter I use in this video is my OWON XDM1041 and the bench power supply is my RIDEN RD6006.

The demo circuit used a 1KΩ 1/4W resistor, a 25V 330μF electrolytic capacitor, and an 18V supply.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Heat Shrink Wire ConnectorsThis is an image of the product.

Let’s go shopping!

Unboxing #5: Unboxing of AliExpress TE-801 Third Hand With Magnifier | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I unbox two “different” helping hands (AKA “third hand”) only to discover they are the same TE-801 model.

I purchased these separately on AliExpress:

They are exactly the same product so if you’re planning to purchase might as well get the cheapest option. Note that the first link above also has a separate more expensive option which is actually a different product, I didn’t get one of those.

In addition to unboxing these third hands I also add some 4mm heat shrink to the alligator clips to take the bite out of the teeth.

Note: in this video I have the annoying habit of calling “heat shrink”, “shrink wrap”. The correct term is heat shrink, shrink wrap is a different type of thing.

In the video I use 4mm yellow heat shrink:

The hot air gun I use is a part of my Horusdy Soldering Station.

The batteries I use are Duracell AAA batteries.

My gloves are:

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

ENGINEER PA-09 Crimping ToolThis is an image of the product.notes

Let’s go shopping!

Early Content #10: Enameled Bodge Wire With UV Solder Mask | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I solder three different sized bodge wires onto some perfboard for practice and for the purpose of exposition. After attaching the three bodge wires I cover them with UV solder mask.

If you haven’t heard of the expression “bodge wire” before, ChatGPT will explain.

I want to thank my mate Bruce from Branchus Creations for recommending the enameled wire of various sizes, the Swann Morton blades, and the Amtech flux.

I got three rolls of this enameled copper wire from AliExpress:

The diameters of the various rolls I got were:

Size mm inches
Small 0.07mm 0.003″
Medium 0.16mm 0.006″
Large 0.31mm 0.012″

I got the “coppery” colour, not the red stuff.

The Swann Morton blade handles I got were these:

I got three types of blades in #15C, #15, and #10 sizes:

The #15C Swann Morton blade is the smallest and is so far my favourite. The #15C is the blade I use in this video.

My flux is:

The industrial/precision tweezers I mention in the video are these:

The solder lugs I refer to are these:

The perfboard I used in this video was a 2x8cm board which I picked up from AliExpress:

I use two microscopes in this video:

In the video I reference my thermal imager:

My gloves are:

My head-mounted magnifying glasses are:

The soldering iron I use in this video is a part of my Horusdy soldering station:

My desoldering pump came in this kit:

The solder mask I ordered was this green stuff, but the stuff they actually sent me was red:

The solder I use in this video is:

My paint brush is the 5/0 sized brush from this set:

The blow torch I mention in this video is this one:

My Kapton tape and tape dispenser are these:

The bench multimeter I use in the video is a:

  • OWON XDM1041 Bench Multimeter

The isopropyl (IPA) alcohol I use in this video is this stuff:

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Amazon Basics Ratchet ScrewdriverThis is an image of the product.notes

Let’s go shopping!