Tag Archives: Experiment

The Sunrise-Sunset Light | Project 7/30 | Maxitronix 30in1 | In The Lab With Jay Jay

Posted on by
Reply

You can support this channel on Patreon: patreon.com/JohnElliotV

This post is part of my video blog and you can find more information about this video.

Silly Job Title: Systems Architect. I am the Systems Architect!

In this video we continue to work through our Maxitronix 30in1, today doing project #7: The Sunrise-Sunset Light. In this project we see how an electrolytic capacitor can control and NPN transistor. By varying the resistor and capacitor we can change the timings of the circuit.

We use the EEVblog BM2257 Digital Multimeter to measure current and voltage.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha IC Extractor Claw IC Chip Pickup ToolThis is an image of the product.

Let’s go shopping!

The Transistor and “Amplification” | Project 6/30 | Maxitronix 30in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Switch Sleuth. I am the Switch Sleuth!

In this video we continue to work through our Maxitronix 30in1, today doing project #6: The Transistor and “Amplification”. In this project we see how an NPN transistor acts as an amplifier.

The HFR trigger coupling I use at the end of the video is called High Frequency Reject, it hides high frequency components from the triggering system and in this case fixed our triggering issue. I haven’t used HFR trigger coupling before. The Rigol user manual for the MSO5000 series doesn’t explain the feature, it just says: “HFR: rejects the high frequency components”.

We use the Rigol MSO5074 Mixed Signal Oscilloscope to examine our input and output voltages, and also to provide a test sine wave for input.

We use the UNI-T UTi260B Thermal Imager to look at the thermals, but there wasn’t anything really to see.

We use the UNI-T UTG962E Signal Generator to provide an input signal, but we couldn’t get it to work properly so we used the signal generate from the scope instead.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

3ELIGHTING 10″-26″ VESA Wall MountThis is an image of the product.

Let’s go shopping!

The Transistor, an Electronic “Trigger” | Project 5/30 | Maxitronix 30in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Power Provider. I am the Power Provider!

In this video we continue to work through our Maxitronix 30in1, today doing project #5: The Transistor, an Electronic “Trigger”. In this project we see how an NPN transistor works.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Emenne 110111 Brush HolderThis is an image of the product.

Let’s go shopping!

The “Invisible Power” Radio | Project 4/30 | Maxitronix 30in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Current Connoisseur. I am the Current Connoisseur!

In this video we continue to work through our Maxitronix 30in1, today doing project #4: The “Invisible Power” Radio. In this project we make a simple radio but it doesn’t work for us.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Macro Programmable 8-Key Mechanical KeyboardThis is an image of the product.

Let’s go shopping!

The One-Way Street | Project 3/30 | Maxitronix 30in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Chief Fuse Blower. I am the Chief Fuse Blower!

In this video we continue to work through our Maxitronix 30in1, today doing project #3: The One-Way Street. In this project we learn a little more about diodes and LEDs.

We use the EEVblog BM2257 Digital Multimeter to investigate voltages within our circuit.

We use the Sharp EL-546L Scientific Calculator to do some basic calculations.

We use the Carpenter Mechanical Pencil to make our notes.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Fluke 17B+ Digital MultimeterThis is an image of the product.

Let’s go shopping!

The Electronic Storage Tank | Project 2/30 | Maxitronix 30in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Tech Lead. I am the Tech Lead!

In this video we do the 2nd project from the Maxitronix 30in1 Electronics Project Lab Kit: The Electronic Storage Tank.

We use the Rigol MSO5074 Mixed Signal Oscilloscope to measure the voltage across the capacitor.

We use the UNI-T UTi260B Thermal Imager to check for thermal response (there was none).

We use the Riden RD6006 Bench Power Supply to provide 3V to our test circuit.

We use the EEVblog BM2257 Digital Multimeter to measure voltage across the capacitor.

We use the Peak Electronic Design Atlas DCA75 Pro Semiconductor Analyzer to measure the forward voltage of our LED.

We use the Kaisi S-160 45x30cm Repair Mat as our workspace.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Rigol PLA2216 Compatible Logic ProbeThis is an image of the product.notes

Let’s go shopping!

Intro Project Fix from Jason Jacques | Project 1/30 | Maxitronix 30in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Phase Pharaoh. I am the Phase Pharaoh!

In this video we revise Project 1 of our Maxitronix 30in1 by incorporating some feedback received from fellow YouTuber Jason Jacques. Thanks Jason!

Will will pick up at Project 2 next week.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

SUNSHINE Hard Brush SetThis is an image of the product.notes

Let’s go shopping!

Intro Project | Project 1/30 | Maxitronix 30in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Relay Renegade.

In this video we build project #1 of our Maxitronix 30in1, the Intro Project.

We use the Rigol MSO5074 Mixed Signal Oscilloscope to examine our circuit.

We use the UNI-T UTi260B Thermal Imager to examine the thermals.

We use the EEVblog BM2257 Digital Multimeter to test continuity and measure current and resistance.

We use the Peak Electronic Design Atlas LCR45 LCR Meter to get vital statistics for our transformer and piezo earphone.

We use the Riden RD6006 Bench Power Supply to power our test circuit.

We use the Horusdy Soldering Station with Hot Air Gun to shrink our heat shrink.

We use the Scotch Titanium Scissors to cut our heat shrink.

We use the Plato Model 170 Wire Cutter to cut wire.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 10pc File & Rasp Set Metal FileThis is an image of the product.

Let’s go shopping!

Concluding Maxitronix 20in1 | Maxitronix 20in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video we conclude our Maxitronix 20in1.

The videos we made for this feature of the show:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Double-ended Cotton SwabsThis is an image of the product.

Let’s go shopping!

Weather Indicator | Project 20/20 | Maxitronix 20in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video we do the 20th project from the Maxitronix Sensor Robot 20 (20in1) Electronics Project Lab Kit: Weather Indicator.

We use the Rigol MSO5074 Mixed Signal Oscilloscope to have a look at the two square waves from the astable multivibrators.

We use the UNI-T UTi260B Thermal Imager to investigate the circuit’s heat profile.

We use the Riden RD6006 Bench Power Supply to deliver 9V to power the circuit and to report on its current draw.

Thanks very much for watching! And please remember to hit like and subscribe! :)




Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Macro Programmable 8-Key Mechanical KeyboardThis is an image of the product.

Let’s go shopping!