Tag Archives: In The Lab With Jay Jay

Electronics Project #3: USB Light Dimmer for On Air Light | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Spark Slinger

In this video I install a potentiometer for my On Air light so I can adjust its brightness.

I apologize in advance for the camera placement in this video. A lot of the recording misses the action because of the camera angle. I will try to make sure this doesn’t happen in future videos!

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Maxitronix Crystal Radio Kit Electronics ProjectThis is an image of the product.notes

Let’s go shopping!

Introducing Maxitronix 20in1 | Maxitronix 20in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video we introduce the Maxitronix Sensor Robot 20, known to us as the Maxitronix 20in1.

You can see the introductory manual pages below, or there is a more readable version here.





Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Maxitronix 60 In 1 (60in1) Electronics Project Lab KitThis is an image of the product.notes

Let’s go shopping!

Concluding Maxitronix 10in1 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video we conclude the Maxitronix 10in1 Electronic Project Lab.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Sudake SDK07 Test ClipsThis is an image of the product.notes

Let’s go shopping!

Burglar Alarm | Project 10/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the tenth Maxitronix 10in1 Electronic Project Lab project: Burglar Alarm.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 365nm UV LampThis is an image of the product.notes

Let’s go shopping!

Audio Frequency Oscillator | Project 9/10 | Maxitronix 10in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the ninth Maxitronix 10in1 Electronic Project Lab project: Audio Frequency Oscillator.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 52 in 1 Tiger WrenchThis is an image of the product.notes

Let’s go shopping!

Patrol Car Siren | Project 8/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the eighth Maxitronix 10in1 Electronic Project Lab project: Patrol Car Siren.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

JST XH2.54 Connector KitThis is an image of the product.

Let’s go shopping!

Wireless Continuous Wave Transmitter | Project 7/10 | Maxitronix 10in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the seventh Maxitronix 10in1 Electronic Project Lab project: Wireless Continuous Wave Transmitter.

While conducting this experiment I made some notes over here: Maxitronix/10in1/7.

I made a bunch of mistakes while building and testing this circuit, and a lot of the footage I took didn’t make it into the final video. In particular in between the construction part of the video at the beginning, and the testing part of the video at the end, I added a ceramic capacitor at the base of the transistor; I hadn’t understood the instructions to install this capacitor as it wasn’t wired in using spring terminals like all the other components.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

NOYAFA NF-521 Thermal ImagerThis is an image of the product.notes

Let’s go shopping!

1-Transistor Radio With Diode | Project 6/10 | Maxitronix 10in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the sixth Maxitronix 10in1 Electronic Project Lab project: 1-Transistor Radio With Diode.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

SUNSHINE Hard Brush SetThis is an image of the product.notes

Let’s go shopping!

1-Transistor Radio | Project 5/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the fifth Maxitronix 10in1 Electronic Project Lab project: 1-Transistor Radio.

This is the second radio circuit and just like the previous radio circuit I wasn’t able to make this one work either! But at least this time I did get some static noise out of the circuit, which was better than the “nothing” which I got out of the previous circuit.

Also, I did learn how to setup a frequency measurement on my oscilloscope: Measure -> Add -> Freq. Easy peasy! :)

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Scotch Titanium ScissorsThis is an image of the product.notes

Let’s go shopping!

Diode Radio | Project 4/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the fourth Maxitronix 10in1 Electronic Project Lab project: Diode Radio.

This experiment is a little disappointing, I couldn’t make it work in the end.

But I did learn not to leave my coffee cup on my project mat because it interferes with the thermal cam!

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

FNIRSI DC580 Power ModuleThis is an image of the product.

Let’s go shopping!