Today is the first day I have used my signal generator, my scope, and a breadboarded circuit, at the same time. Used my multi-meter with its new cables too!
Thanks to my friend Raz for his help. <3
Progress
Reply
Tag Archives: multi-meter
Current measurements
So I used my new cables in anger. I took a reading of the current draw on 300in1 project 155 that I was working on the other day. Will be able to experiment with the effect of using different resistors (and none at all).
Multi-meter cables
Made some cables. Male banana plug into male jumper wire. Got some of these and cut them. Made a pair of long ones and two pairs of short ones. This is so I can plug my multi-meters into my breadboards. Gonna do the same thing with some BNC attached coax so I can hook up my scope and with some female DuPont cables so I can plug into male pin headers.
