Monthly Archives: July 2024

Speech Conductor | Project 10/20 | Maxitronix 20in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the tenth Maxitronix 20in1 Electronic Project Lab project: Speech Conductor.

In this project we learn a little about transistors, amplifiers, and astable multivibrators.

Note: while I was making this video I took a detour into making a cable, which didn’t work out. You can see the video about that over here: Extra Content #13: Failing to Attach Banana Plugs to Microphone Cables | In The Lab With Jay Jay.



Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

ALKOY Capacitor Discharge PenThis is an image of the product.notes

Let’s go shopping!

Extra Content #13: Failing to Attach Banana Plugs to Microphone Cables | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I try to attach some banana plugs to my microphone cables, but I do not succeed.

I tried to find some examples of how to do this properly on YouTube, but I didn’t find much: how to assemble banana plugs

I did find a video of a guy who essentially just explained all the problems I ran into: Banana Plugs & Binding Posts

And this one over here confiremed: How to fit a Banana Plug

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pcs Releasable Cable OrganizerThis is an image of the product.

Let’s go shopping!

Extra Content #12: Fixing the Family Sunbeam Kettle | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take apart a broken kettle then put it back together, then magically it is fixed!

In this video I use my Yum Cha Mini Magnetic Precision Screwdriver Set for the first time. It takes me a little while to figure out how to clip the tips in. I needed the triangle bit for this job.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Bosch IXO VI Electric ScrewdriverThis is an image of the product.notes

Let’s go shopping!

Protoboard

Posted on by
Reply

I have been on the lookout for some good protoboard for a while now, and today I found this: ElectroCookie Solderable Breadboard PCB Board for Electronics Projects Compatible for DIY Arduino Soldering Projects, Gold-Plated (9 Pack + 3 Mini, Multicolor Pack).

It is cheap and well laid out, which is a combination of properties I have had some trouble finding. For instance if you search for ‘protoboard’ over on AliExpress you don’t get any good results.

Anyway. I got myself two twelve packs. Average cost of AU$2.25 per board.

p.s. I went back and got these as well:

This ElectroCookie stuff is good value!

Introducing Silicon Chip and Jaycar Mini Projects | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I introduce the new Mini Projects feature, wherein we will be building the Mini Projects published by Silicon Chip magazine and sponsored by Jaycar Electronics.

There is a page on my wiki for recording progress: Mini Projects.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha SpudgersThis is an image of the product.

Let’s go shopping!

Channel News #4: I Am Altering the Deal, Pray I Don’t Alter It Any Further | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I announce a few things:

  1. The definition of a “new book” is now anything published during or since the year 2000 (it used to be anything that was published within the last ten years)
  2. The various features of the show now come with numbers per segment/feature (this is Channel News #4 for example)
  3. There will be a new main show feature called Maths Homework which will be starting soon (I just need to get a new camera so I can record this new feature)

Thanks very much for watching! And please remember to hit like and subscribe! :)

p.s. Light Forces fo’ Life! ❤️

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha IC Chip Pickup ToolThis is an image of the product.

Let’s go shopping!

Electronics Project #7: ICL8038 Monolithic Function/Signal Generator Kit Build and Test | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Buzz Boss

In this video I build and test this kit I purchased from AliExpress: ICL8038 Monolithic Function Signal Generator Module Sine Square Triangle Signal Generators DIY Welding Practice Kit.

My notes are on my wiki: ICL8038.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Swann & Morten Handle For No. 10 10A 11 15 15A Scalpel HandleThis is an image of the product.

Let’s go shopping!

Mail Call #4: More Loot from AliExpress and eBay! | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I receive the following equipment:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

RELIFE RL-007GA Solder LugsThis is an image of the product.notes

Let’s go shopping!