Extra Content #9: Unboxing and Organising New Mini Screwdriver Kits from AliExpress | In The Lab

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take stock of my new screwdriver kits and organise and document them. Following are the three screwdriver kits I show in this video.

Yum Cha 29 In 1 Mini Precision Screwdriver SetThis is an image of the product.notes
Ausum 25 In 1 Precision Screwdriver SetThis is an image of the product.notes
Yum Cha Mini Magnetic Precision Screwdriver SetThis is an image of the product.notes

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yutiars Flat Paint BrushesThis is an image of the product.notes

Let’s go shopping!

Mail Call #1: Cheap Stuff from China! Thanks AliExpress! | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I open up a bag of goodies I received from my recent order at AliExpress. They were having a sale and I purchased ten items, as detailed in the video and below. At the same time I ordered an extra two bags, and I will be opening those in future videos on the channel.

This is the bulk stuff I cover in this video:

And this is the equipment I cover in this video:

MOKIN CMO-346 3 inch Magnetic TrayThis is an image of the product.notes
Yum Cha 100pcs Releasable Cable OrganizerThis is an image of the product.notes
Yum Cha Heavy Duty Stainless Steel Wire BrushThis is an image of the product.notes
TOOKKS HZY ABS Wire FixtureThis is an image of the product.notes
Yum Cha Metallic Craftwork PenThis is an image of the product.notes
Yum Cha 2pcs Magnetic Soft Vise Jaw PadsThis is an image of the product.notes

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

UNI-T UT116A Digital TweezersThis is an image of the product.notes

Let’s go shopping!

Extra Content #8: The Great Resistor Clean of 2024 | Learning Electronics In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I clean my 1% and 2% tolerance resistors (my 5% tolerance resistors were cleaned previously). That’s 37 component trays worth, being 37 different types from 1Ω to 1MΩ. During the video I print new labels for the component drawers with my label maker and I use my iPhone to double check the colour coding.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Amazon Basics Ratchet ScrewdriverThis is an image of the product.notes

Let’s go shopping!

Unboxing #11: Unboxing and Installation of Horusdy 39-Drawer Component Drawers | In The Lab

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I unbox and install my new Horusdy 39-drawer component drawers.

Unfortunately I missed a little bit of footage near the end of the installation because my camera locked up.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Maxitronix Electronic Metal Detector Kit Electronics ProjectThis is an image of the product.notes

Let’s go shopping!

Fixing duplication in HTML title element for WordPress with Yoast SEO installed

I was having a problem in WordPress for my blog where the title contained duplicate values, like “John’s blogJohn’s blog”.

The fix for me was to edit wp-content/themes/twentyeleven/header.php and disable a bit of the output, as shown below. I basically just added an if ( false ) to disable the code which caused the duplicate content.

This seems to effectively mean that Yoast SEO is in charge of the titles now. You can configure separately the homepage, posts, and pages titles in the Yoast SEO settings. I configure mine in Yoast SEO Settings / Content Types like this:

Homepage
Site title Separator Tagline
Posts
Title Separator Site title
Pages
Title Separator Site title
<title>
<?php
  // Print the <title> tag based on what is being viewed.
  global $page, $paged;

  wp_title( '|', true, 'right' );

// 2024-07-14 jj5 - OLD: I removed this because wp_title() (above) does everything that needs to be done.
if ( false ) {
  // Add the site name.
  bloginfo( 'name' );

  // Add the site description for the home/front page.
  $site_description = get_bloginfo( 'description', 'display' );
  if ( $site_description && ( is_home() || is_front_page() ) ) {
    echo " | $site_description";
  }

  // Add a page number if necessary:
  if ( ( $paged >= 2 || $page >= 2 ) && ! is_404() ) {
    /* translators: %s: Page number. */
    echo esc_html( ' | ' . sprintf( __( 'Page %s', 'twentyeleven' ), max( $paged, $page ) ) );
  }
}
?>
</title>

Super gluing number pad holder together

Over time the joint on this holder comes a bit loose and I have to tighten it back up again. This time when I tightened it I dumped a whole tube of superglue in there. Hopefully that holds it!

I do put it under quite a bit of strain. In addition to holding the number pad for the booth, it also holds a bunch of my cables which I hang over it.

That red tape you can see I put there to stop the glue from leaking too much. I will remove that once the glue is dry.

A photo of the arm which holds the number pad to the table