Stolen Focus

Posted on by
2

I have finished reading Stolen Focus by Johann Hari (affiliate link).

I went into this book much more worried about the state of attention in our communities than I was when I came out. Having read about it I kinda don’t feel that we really do have an urgent problem with so many people on earth being constantly engaged with their smart phones.

I might have trouble now starting a conversation with a family member because they are engrossed in their phone, and I might think this is new or different, but thirty years ago it would have been the same thing if they had their nose in a book or a newspaper.

I think by and large it’s good when we’re paying attention to things and engaging with them. That’s not only how entertainment gets done, that is also how work gets done.

I suspect one of the driving forces behind the surge in ADHD diagnoses (and Hari didn’t say this) is that people are getting the diagnosis deliberately because they want access to prescription amphetamines.

Anyway. I would still recommend reading this book. Hari does a good job of covering all the bases and investigating all the topics, including:

  • context switching and its effects
  • effects on flow
  • physical and mental exhaustion
  • sustained reading
  • mind wandering
  • tracking and manipulation
  • stress and its triggers
  • diet and pollution
  • ADHD
  • physical and psychological confinement

Unboxing #6: Unboxing of K-CEVE AM-KVM401-K and KC-KVM401A 4-port HDMI KVM switches | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Current Commander

Today: another unboxing video! I do these, not because I think that my regular viewers are going to be particularly interested, but because you really only get the opportunity to do these on the day that new equipment arrives, and I figure it might be helpful for people who search for unboxing videos for a particular product, so they can see what’s in the box before they make a purchasing decision.

This video is an unboxing of two different 4-port HDMI KVM switches. I would give you affiliate links but these don’t seem to be available in the USA, so here are the non-affiliated Amazon Australia links:

For the record I paid AU$64.56 for the AM-KVM401-K (US$40) and AU$84.14 for the KC-KVM401A (US$55). I don’t know what algorithm is in charge of pricing at Amazon but the prices seem to have gone way up since I purchased these things two days ago, now the AM-KVM401-K is AU$75.96 and the KC-KVM401A is AU$98.99, so not sure what’s up with that (but I do NOT like the idea that Amazon has a pricing system that isn’t offering all shoppers the same price all the time, which this smells like).

I reckon the K-CEVE marketing department is going to bit pretty upset with engineering or manufacturing about this, but when I was unboxing the AM-KVM401-K the front panel push button switch just dead set fell out! That’s gotta be embarrassing for someone.

Having done the unboxing I’ve decided I’m gonna try the larger KC-KVM401A unit first. Its larger size is a disadvantage but I like the fact that it has USB-A instead of USB-C inputs and I’m also happy that it has a dedicated 5V power rail, the AM-KVM401-K is powered off the USB bus which is less desirable.

I will post another article later to let you know how I went when I actually plug these things in, which I haven’t actually done yet.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha TE-801 Third HandThis is an image of the product.notes

Let’s go shopping!

Electronics Project #1: ALKOY Capacitor Discharge Pen Teardown | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Electron Herder

This video is a teardown of the ALKOY Capacitor Discharge Pen which I did for YouTube user t1d100 who asked me about it over here: Demo of the ALKOY Capacitor Discharge Pen | In The Lab With Jay Jay.

I made a bunch of mistakes while making this video, so please bear with me. I tried to add some captions to explain things when I went wrong.

The discharge pen that I have was purchased from Amazon Australia here: 1000V Portable Capacitor Discharge Pen High Voltage Quick Discharging Tool Constant Discharge Pen Electronic Repairs Discharge Pen ALKOY.

There seems to be a similar product available from Amazon USA here: YEKMLCO Capacitor Discharge Pen Fast Discharging High Voltage 1000V Repair Tool Discharger for Electronic Safety Intelligent (affiliate link).

In the video you can watch me break this thing open. I didn’t exactly know how to do it, and I permanently damaged the device while opening it. In the end I wasn’t 100% sure what the safe and proper way to open these things really is. Giving it a mighty pull might work, otherwise you will need to leverage off some friction locks.

Before I broke the device open I tried to measure the resistance across its probes, but all three measurement devices reported open circuit. The device doesn’t seem to engage the resistor until it detects a voltage.

Eventually I got the device open, you can see some photos of the circuit board below, and I make some attempt to identify the components.

The MB10F on the top is a bridge rectifier, the M7F in the middle is a rectifying diode, and the resistor at the bottom is 2MΩ. In the video I say that the resistor is a “two ohm resistor”, but it is actually a “two MEGA ohm resistor” (I knew that, I just misspoke).

I’m not 100% sure what the CS01N100 A3R is, but it seems than an CS01N100 A4R is a silicon N-Channel Power MOSFET, so I think that’s probably what that is.

As I broke this device during the teardown I have purchased myself a replacement device for AU$23.02.

In the video I use the following equipment (affiliate links where possible):

Mini Digital Tweezers Miniware DT71 Mini Digital Tweezers Smart SMD LCRDVF Tester Multimeter Signal Generator for Measuring Components
SMD Digital Tweezers UNI-T UT116A Digital Tweezers Smart SMD Tester Electrical Multimeter Resistance Capacitance Continuity Diode Test Meter
Component Tester FNIRSI DSO-TC3 Digital Oscilloscope Transistor Tester 10MS/s Sampling Rate 500kHz Bandwidth Support Diode LCR Detect Signal Generator
Soldering Station Horusdy 2in1 Soldering Station Solder Iron Rework Hot Air Blower Digital SMD Display + 11 Tips, 4 Nozzles & Tweezer Set
Mini Screwdriver Set Legion Tools Precision Mini Screwdriver Set 11pc Jeweller Laptop Phone Watch Repair Tool
Repair Mat Kaisi Heat Insulation Silicone Repair Mat with Scale Ruler and Screw Position for Soldering Iron, Phone and Computer Repair Size: 13.7 x 9.8 Inches
Desoldering Pump Kaisi Professional Solder Auxiliary Tool 6 piece double-sided repair tool with Desoldering Wick & Desoldering Pump
Craft Knife Precision Craft Knife Set 52pcs Professional Razor Sharp Knives for Art, Hobby

In the video I have trouble with the connections into the DSO-TC3, the connections are documented here: FNIRSI DSO-TC3.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 52 in 1 Tiger WrenchThis is an image of the product.notes

Let’s go shopping!

Channel News #1: Stetmann Cosplay Costume Reveal | Learning Electronics In The Lab With Jay Jay

Posted on by
2

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Craig Entertainer

Here it is! As planned, my new costume! Just for fun when I record electronics videos in my lab I’m gonna dress myself up like Egon Stetmann the scientist from StarCraft II:

The cosplay costume reveal is in this video. Also some news and discussion about the goals for the channel over the longer term.

As mentioned in this video I will have a new job title for my ID card for each video. The inaugural job title is Craig Entertainer, for my only regular reader, Craig. :)

Here are some affiliate links to the bits and pieces I got for the costume:

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

aToolTour Extra Long Magnetic Drill Bit ExtensionThis is an image of the product.notes

Let’s go shopping!

Johann Hari

Posted on by
4

Johann Hari is definitely a crank. I like him already! He wrote a book about drugs and addiction called Chasing the Scream, and there was a famous TED talk he did about that. I haven’t read Chasing the Scream, but this evening I am going to read Stolen Focus: Why You Can’t Pay Attention and How to Think Deeply Again.

Note: the links to Amazon above are affiliate links. I recently signed up for an affiliate account with Amazon. Is that cool? Is that not cool at all? What sort of disclosures are appropriate when you use affiliate links? I have never used them before and am not expecting to make any significant amount of money with them, so maybe I should just not use affiliate links at all? I dunno. Would be happy to hear from you if you have an opinion.

Hardware debugging

Posted on by
Reply

Read a bunch of stuff about hardware debugging. Learned a thing or two, but I have much further to go!

Books by Kevin Kelly

Posted on by
Reply

Here is a list of books from Kevin Kelly, the founding editor of Wired. This is just notes for Future John. I’m planning to read the first two, and maybe the last one; the others are old and hard to find in ebook or audible forms.