Mail Call #4: More Loot from AliExpress and eBay! | Learning Electronics In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I receive the following equipment:

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

RELIFE RL-007GA Solder LugsThis is an image of the product.notes

Let’s go shopping!

Frequency response

So I pumped a 1 kHz square wave into my DTL OR gate and observed the behaviour with my scope!



The square wave is in yellow, and the blue is the output signal.

You can see the output doesn’t drop back to zero quite as fast as the input.

You can see on the multi-meter to the right that the current draw is about 5.83 mA. That’s consistent with my earlier measurements given a duty cycle of 50%.

And you can see in the following photo that the frequency response of the circuit is rubbish. If you go much above about 10 kHz the output just stays “on”.