New electrical wiring

My new 10-way powerboard arrived today and I wired it into the booth along with a PowerShield Defender 1200 UPS battery which I had spare.

Then I had two spare powerboards so I installed one of them (with an RCD Safety Switch) behind the bench. You can see it in the photo below. The thing you can see plugged in on the top is my Watt Meter, it reports on current draw and power usage.

I am pretty happy with today’s handiwork.

John's powerboard installed behind his bench

Mail Call #9: Tools and Equipment from Jaycar, Amazon, and AliExpress | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I go through what arrived in the mail recently.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Multifunction Hook ToolsThis is an image of the product.

Let’s go shopping!

Demo #1: How to Use All the Features of the Fluke 17B+ Digital Multimeter | In The Lab With Jay Jay

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take a look at how to use all of the features of my new Fluke 17B+ Digital Multimeter.

This is the inaugural demo video. We now do an ‘unboxing’ and a ‘demo’ separately. In the demo videos we try to take a close look at each feature of a product. Whereas with the unboxing we just make a record of the unboxing experience and take a cursory look at a few features.

If you’re interested in the Fluke 17B+ then in addition to watching this demonstration video you might also like to see the unboxing: Unboxing #14: Unboxing of Fluke 17B+ Multimeter | Learning Electronics In The Lab With Jay Jay.

The slides for this video are here: https://www.jj5.net/fluke-17b-plus/

In the video we cover:

  • high current fuse test
  • low current fuse test
  • AC voltage measurement
  • DC voltage measurement
  • DC millivolts measurement
  • AC current measurement
  • DC current measurement (including milliamps and microamps)
  • continuity testing
  • diode testing (with forward bias measurement)
  • resistance measurement
  • capacitance measurement
  • temperature measurement
  • frequency measurement (10 Hz to 400 kHz)
  • duty cycle measurement (of regular sine wave)
  • relative measurement feature
  • measurement hold feature
  • backlight usage
  • min/max measurement

We were lead astray by the slide for the current test which indicates the wrong terminal for the current measurement! I got these slides from Fluke in the 15B/17B/18B | Quick reference guide on the Manuals+resources tab on their documentation for the Fluke 17B+ Digital Multimeter. So it is pretty disappointing that the official Fluke documentation led me astray like that! But we figured it out in the end so all is well that ends well.

Errata: at around the 24 minute mark I try to introduce a load across my 9 V AC input voltage but I don’t correctly wire it in. So when I think I’m testing with a load attached there is in fact no load attached.

Thanks very much for watching! And please remember to hit like and subscribe! :)


Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Long Handle Wire BrushThis is an image of the product.notes

Let’s go shopping!