Category Archives: Hardware

Audio Frequency Oscillator | Project 9/10 | Maxitronix 10in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the ninth Maxitronix 10in1 Electronic Project Lab project: Audio Frequency Oscillator.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 52 in 1 Tiger WrenchThis is an image of the product.notes

Let’s go shopping!

Patrol Car Siren | Project 8/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the eighth Maxitronix 10in1 Electronic Project Lab project: Patrol Car Siren.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

JST XH2.54 Connector KitThis is an image of the product.

Let’s go shopping!

Wireless Continuous Wave Transmitter | Project 7/10 | Maxitronix 10in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the seventh Maxitronix 10in1 Electronic Project Lab project: Wireless Continuous Wave Transmitter.

While conducting this experiment I made some notes over here: Maxitronix/10in1/7.

I made a bunch of mistakes while building and testing this circuit, and a lot of the footage I took didn’t make it into the final video. In particular in between the construction part of the video at the beginning, and the testing part of the video at the end, I added a ceramic capacitor at the base of the transistor; I hadn’t understood the instructions to install this capacitor as it wasn’t wired in using spring terminals like all the other components.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

NOYAFA NF-521 Thermal ImagerThis is an image of the product.notes

Let’s go shopping!

1-Transistor Radio With Diode | Project 6/10 | Maxitronix 10in1 | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the sixth Maxitronix 10in1 Electronic Project Lab project: 1-Transistor Radio With Diode.

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

SUNSHINE Hard Brush SetThis is an image of the product.notes

Let’s go shopping!

1-Transistor Radio | Project 5/10 | Maxitronix 10in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video on this show’s homepage which is here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I do the fifth Maxitronix 10in1 Electronic Project Lab project: 1-Transistor Radio.

This is the second radio circuit and just like the previous radio circuit I wasn’t able to make this one work either! But at least this time I did get some static noise out of the circuit, which was better than the “nothing” which I got out of the previous circuit.

Also, I did learn how to setup a frequency measurement on my oscilloscope: Measure -> Add -> Freq. Easy peasy! :)

Thanks very much for watching! And please remember to hit like and subscribe!

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Scotch Titanium ScissorsThis is an image of the product.notes

Let’s go shopping!

Standard Aussie home television aerial RF coaxial connector

Posted on by
Reply

Man I had a lot of trouble figuring out what these things are called. I can tell you that they are not called F-Type, BNC, SMA, N-Type, or PL-259 connectors. In the I end I asked about this and learned these connectors are called Belling-Lee connectors, also known as IEC 169-2 Female/Male. But if you search for “IEC connector” (which these things are apparently sometimes called) you will only find the power adapters, not these aerial connectors.

New computer ‘trail’

Posted on by
Reply

I have built a new computer ‘trail‘ out of my old workstation ‘tradition‘. I was able to do this because I migrated the VirtualBox VMs that were running on ‘tradition’ over to QEMU/KVM VMs now running on ‘lore‘.

My new computer ‘trail’ is setup as the recording workstation for the “booth” in my studio. This is good because now I can record at 4K in the booth!

I don’t use Windows much these days but this new studio workstation runs Windows 11 Pro. I haven’t used software RAID on Windows before but for this workstation I setup a RAID1 mirror using 2x 2TB NVMe drives. I was able to configure the block size for the NTFS file system so I picked 2MB (which was the maximum) as this RAID array will only be for storing video recordings (which are huge files).