Tag Archives: In The Lab With Jay Jay

Mail Call #40: Tools, Kits, Boards, and Components from AliExpress | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Solder Soldier.

In this video we take a look at what arrived from AliExpress:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Mini Magnetic Precision Screwdriver SetThis is an image of the product.notes

Let’s go shopping!

Mail Call #39: 1/4 W, 1/2 W, and 1 W Resistors from AliExpress | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Bolt Baron.

In this video we take a look at some resistors which arrived from China:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

PowerShield Defender 1200 UPSThis is an image of the product.

Let’s go shopping!

Intro Project | Project 1/30 | Maxitronix 30in1 | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Relay Renegade.

In this video we build project #1 of our Maxitronix 30in1, the Intro Project.

We use the Rigol MSO5074 Mixed Signal Oscilloscope to examine our circuit.

We use the UNI-T UTi260B Thermal Imager to examine the thermals.

We use the EEVblog BM2257 Digital Multimeter to test continuity and measure current and resistance.

We use the Peak Electronic Design Atlas LCR45 LCR Meter to get vital statistics for our transformer and piezo earphone.

We use the Riden RD6006 Bench Power Supply to power our test circuit.

We use the Horusdy Soldering Station with Hot Air Gun to shrink our heat shrink.

We use the Scotch Titanium Scissors to cut our heat shrink.

We use the Plato Model 170 Wire Cutter to cut wire.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 10pc File & Rasp Set Metal FileThis is an image of the product.

Let’s go shopping!

Learning the Art of Electronics: Fig-1N.24: Applying the Thévenin model | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Switch Switcher.

In this video we build two circuits for Learning the Art of Electronics.

The pre-reading for today is up to and including page 18 of the course work. So if you have the book try to get that reading done.

In this video we test a circuit and its Thévenin model to see that they behave as expected. They do! But I’m still trying to get my head around all of the details…

I mention about my decade boxes. The good one is this one: Multicomp Pro MP701033 Resistor Box (I have ordered two more of these) and the crappy ones are these ones: Yum Cha J15026-2 6-Knob Resistor Box.

I also mention about the analog multimeters, this is the crappy one I have: Yum Cha MF-110A Analog VOM Handheld Multimeter and this is the slightly less crap one which I have on order: Pro’sKit MT-2207-C Analog VOM Handheld Multimeter.

In the video:

We use the METCAL PS-900 Soldering Station for soldering.

We use the EEVblog BM2257 Digital Multimeter to get our voltage and current readings.

We use the Riden RD6006 Bench Power Supply to power our test circuits.

We use the Brother P-Touch D210 Label Maker to label our circuits.

We use the Scotch Titanium Scissors to cut things.

We use the Carpenter Mechanical Pencil for writing our notes.

We use the Hakko CHP 3C-SA Precision Tweezers to do precision work.

We use the Plato Model 170 Wire Cutter to trim our leads and wires.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

JST XH2.54 Connector KitThis is an image of the product.

Let’s go shopping!

Mail Call #38: Cheatsheet, Lego, Banana-to-DuPont, Banana Cables, and Digital Multimeters

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Energy Maestro.

In this video we take a look at what has arrived in the mail:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

FNIRSI DC580 Power ModuleThis is an image of the product.

Let’s go shopping!

Learning the Art of Electronics: Fig-1N.23: Hypothetical Voltage Divider | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Operation Manager.

In this video we build our first circuits for Learning the Art of Electronics. The introductory video for this project is here: Introducing Learning the Art of Electronics.

The pre-reading for today’s project is up to page 17 of the course work. If you want to dig deeper there is extra reading to be found on the project home page. Note that some of my notes on the ITL Wiki are only available to people who support me on Patreon (see above).

We use the METCAL PS-900 Soldering Station for soldering.

We use the EEVblog BM2257 Digital Multimeter to test voltages and currents.

We use the Riden RD6006 Bench Power Supplies to power our test circuits.

We use the Brother P-Touch D210 Label Maker to label our circuits.

We use the WilliamKlein Music Stand to hold our book.

We use the Scotch Titanium Scissors to cut things.

We use the Carpenter Mechanical Pencil to make our notes.

We use the Hakko CHP 3C-SA Precision Tweezers for precision maneuvering.

We use the Plato Model 170 Wire Cutter to cut our wires.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following are some happy snaps of the results:




Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 9 in 1 Air Quality MeterThis is an image of the product.

Let’s go shopping!

Mail Call #37: Cheap Stuff from AliExpress | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Luminary Luminar.

In this video we get Excel Tips and Tricks from Amazon and the following stuff from AliExpress:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha Blue SpudgersThis is an image of the product.

Let’s go shopping!

Mail Call #36: QuickStudy Cheatsheets and Soldering Stuff from Amazon | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Electronics Guru.

In this video we see what arrived in the mail from Amazon. The main haul was my QuickStudy cheatsheets. But I also go this stuff too:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pcs Heat Shrink Wire ConnectorsThis is an image of the product.

Let’s go shopping!

Electronics Project #16: Making Power Cables for Learning the Art of Electronics | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Transistor Troubadour.

In this video we make some power cables which we will be using when we start to make the circuits for Learning the Art of Electronics. In particular we make two banana jack to DC barrel male and three DC barrel female to JST PH2.0 male. I also accidentally made a DC barrel male to JST PH2.0 but I’m not planning to use that.

The ElectroCookie printed circuit boards (PCBs) I will be using for the LAoE projects are these:

We use the METCAL PS-900 Soldering Station for soldering.

We use the EEVblog BM2257 Digital Multimeter to test continuity.

We use the Horusdy Soldering Station with Hot Air Gun to shrink our head shrink.

We use the Hakko CHP 3C-SA Precision Tweezers for working the wire.

We use the Plato Model 170 Wire Cutter to cut things.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 4pcs 30mm Deep Hole PenThis is an image of the product.notes

Let’s go shopping!

Electronics Project #15: Making Project Board for Learning the Art of Electronics | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Joule Juggler.

In this video we make a project board for use in our Learning the Art of Electronics projects.

In the beginning I mention a few things which have arrived from AliExpress:

We use one of the ElectroCookie Large PCB Prototype Boards and attach female pin header and male pin header. The flux I use is AMTECH NC-559-ASM and my solder is Loctite (Multicore) 60/40 C511 5C 0.56mm.

We use the METCAL PS-900 Soldering Station to for soldering.

We use the Fluke 17B+ Digital Multimeter for continuity testing.

We use the Horusdy Soldering Station with Hot Air Gun to try to melt our flux, unsuccessfully. It turned out the problem I was having with the flux wasn’t that it had hardened in its tube, but that the nozzle had become clogged. When I cleared the nozzle the trouble I was having dispensing the flux went away and the flux flowed freely.

We use the Hakko CHP 3C-SA Precision Tweezers to place our pin header.

We use the Plato Model 170 Wire Cutter to cut solder.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

FNIRSI DC580 Power ModuleThis is an image of the product.

Let’s go shopping!