I reorganized my cameras so that I have a wider view of the bench with my primary camera and a narrower view of the work area for my thermal cam. Also added an extra three zoom levels for the primary camera so I can focus in on the work area more or less as required.
This post is part of my video blog and you can find more information about this video over here.
You can support this channel on Patreon: patreon.com/JohnElliotV
Silly Job Title: Watt Wizard.
In this video we take a look at what arrived in the mail. Mostly loot from AliExpress but also some USB hubs from Amazon.
In the video I mention Goo Gone. The stuff I use is the Original Goo Gone. It’s really great stuff! I mostly use it for removing sticker goo after I’ve peeled a sticker off something.
In this video I learn about “rivet nuts”. The ones I got are these ones. There’s a video on YouTube that will give you the idea about how these things work and are used.
I also mention about the 4017 integrated circuit which is a decade counter used in this project kit.
As promised I scanned the instructions on the cover of my “multitester” which is the analog voltmeter and ammeter I got:
This is the equipment which arrived:
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Yum Cha 9 in 1 Air Quality Meter |
Let’s go shopping!
I’m just about to kickoff with more note taking for my Learning the Art of Electronics project. Am aiming to have the video for the first lab ready for Tuesday.
This post is part of my video blog and you can find more information about this video over here.
You can support this channel on Patreon: patreon.com/JohnElliotV
Silly Job Title: Wattage Warlock.
In this video we build the TJ-56-428 4-Digit Digital Clock just like we did last time.
You read that right. We made one of these before and I liked it so much that we are making one again! I get better at it this time round, I don’t make any of the mistakes I did last time.
In the introduction to this video I mention about my new Blu-ray player which I got so I could watch Colossus: The Forbin Project. Both my Blu-ray disc and my Blu-ray player are for Region B.
As I mention I have been writing for Hackaday! So that’s been keeping me busy.
The instructions for this clock are over here: TJ-56-428 4-Digit Digital DIY Clock (same as last time).
I mention about the new Learning the Art of Electronics project which we’re just about to get started with.
The microcontroller in this clock is the STC15W404AS. It comes in the kit pre-programmed and I’ve not been able to find the software anywhere. Bummer. If you know where to get the software please do let me know!
The temperature controlled resistor is a 10K NTC thermistor which seems to be used for the room temperature function (which I don’t use and didn’t calibrate).
The crystal oscillator is spec’ed as 32768 which is obviously a reference to the clock frequency. See Why do we use 32.768 kHz crystals in most circuits? We check the impedance of this device in the video using the Peak Atlas LCR45.
In the video I mention my mate Joe who helped me out last time I did this project. Thanks Joe!
We use the METCAL PS-900 Soldering Station to do our soldering.
We use the Fluke 17B+ Digital Multimeter to test the voltage on our USB power adapters.
We use the EEVblog BM2257 Digital Multimeter to check our resistors.
We use the Peak Electronic Design Atlas DCA75 Pro Semiconductor Analyzer to test the crystal (we don’t get a reading, which was expected).
We use the Peak Electronic Design Atlas LCR45 LCR Meter to test our crystal. It gives us an impedance reading at 200kHz with both real and imaginary components.
We use the Hakko CHP 3C-SA Precision Tweezers to hold our solder and poke about. At one point I drop a component lead offcut into the board and it shorted two resistors, so lucky I found it and pulled it out!
And that’s everything to know about this project!
Here’s a photo of the completed project installed next to the symbol keyboard on my desk:
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Yum Cha DT830B Digital Multimeter notes |
Let’s go shopping!
My lab makes me happy. Here’s a photo taken this evening.
This post is part of my video blog and you can find more information about this video over here.
You can support this channel on Patreon: patreon.com/JohnElliotV
In this video we see what’s come in the mail!
Also mentioned in this video:
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Yum Cha USB 3.0 Powered 4-Port USB Hub |
Let’s go shopping!
This post is part of my video blog and you can find more information about this video over here.
You can support this channel on Patreon: patreon.com/JohnElliotV
In this video we open the following in the mail from AliExpress.
As I mention in the video I learned about the AD584LH and Resistor Board over here: Brymen BM789 Unboxing and Review.
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Yum Cha 100pc Titanium Plated Drill Bits notes |
Let’s go shopping!
This post is part of my video blog and you can find more information about this video over here.
You can support this channel on Patreon: patreon.com/JohnElliotV
In this video we unbox and demo the R03U Wireless Mono Headset sent to me for review by Rown Fusny. This headset supports wireless connectivity for both USB and Bluetooth. I really enjoyed using this product and their customer support was first class.
It’s a mono device which means it only has a speaker for one ear, which is really good for your situational awareness because you can hear what’s going on in your environment through your other ear. Both the headphone and the microphone worked properly in both USB and Bluetooth mode.
I wasn’t able to get the USB mode to work on my Windows 10 machine, but I don’t know if that was related to the USB hardware on that computer or if it had to do with Windows 10 support for the device. I was able to get USB mode working on a Windows 11 Pro computer and one of my Debian 12 (bookworm) computers. I tested the Bluetooth mode on both iPhone 6s and iPhone 8.
One thing that I needed explained to me was that after you pair your Bluetooth device you may need to double click the power button on the headset in order to toggle from USB mode over to Bluetooth mode in order to activate the device. That’s why I had to contact customer support, because I was confused by this.
The device gives you status updates via audio. So if you toggle to USB mode it says “USB mode” and if you toggle to Bluetooth mode it says “Bluetooth mode”. If you disconnect the USB dongle or unpair the Bluetooth connection it says “disconnected”.
There is a microphone mute button on the headset and there are volume control buttons too. I tested the volume control buttons via Bluetooth but forgot to test via USB… hmm. Gimme a tick. Yep, the volume controls work on USB too!
Overall I was very pleased with this device and I would happily recommend this product!
In preparing this video I made some notes about my headphones which are still available on my wiki.
Thanks very much for watching! And please remember to hit like and subscribe! :)
Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!
Yum Cha 16MP USB Camera |
Let’s go shopping!
I was flipping through my copy of Learning the Art of Electronics: A Hands-On Lab Course (I have the first edition, this second edition comes out in Australia on 3 April 2025, I have a copy on pre-order, I think it’s already available in the USA) and I noticed that some analog meters are used in the first lab course.
So in preparation for doing that I purchased some analog meters, being these:
I am planning to start working through these projects on my YouTube channel @InTheLabWithJayJay at a rate of one project every 28 days starting April 1st. April 1st, being April Fools’ Day, is of course the traditional date for launching IT projects and it is also the one year anniversary of my video (which happens to be my most popular YouTube video by a large margin): New Book Teardown #3: Learning The Art of Electronics: A Hands-On Lab Course (2016) | In The Lab.
