Category Archives: Hardware

Extra Content #13: Failing to Attach Banana Plugs to Microphone Cables | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I try to attach some banana plugs to my microphone cables, but I do not succeed.

I tried to find some examples of how to do this properly on YouTube, but I didn’t find much: how to assemble banana plugs

I did find a video of a guy who essentially just explained all the problems I ran into: Banana Plugs & Binding Posts

And this one over here confiremed: How to fit a Banana Plug

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pcs Releasable Cable OrganizerThis is an image of the product.

Let’s go shopping!

Extra Content #12: Fixing the Family Sunbeam Kettle | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take apart a broken kettle then put it back together, then magically it is fixed!

In this video I use my Yum Cha Mini Magnetic Precision Screwdriver Set for the first time. It takes me a little while to figure out how to clip the tips in. I needed the triangle bit for this job.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Bosch IXO VI Electric ScrewdriverThis is an image of the product.notes

Let’s go shopping!

Protoboard

Posted on by
Reply

I have been on the lookout for some good protoboard for a while now, and today I found this: ElectroCookie Solderable Breadboard PCB Board for Electronics Projects Compatible for DIY Arduino Soldering Projects, Gold-Plated (9 Pack + 3 Mini, Multicolor Pack).

It is cheap and well laid out, which is a combination of properties I have had some trouble finding. For instance if you search for ‘protoboard’ over on AliExpress you don’t get any good results.

Anyway. I got myself two twelve packs. Average cost of AU$2.25 per board.

p.s. I went back and got these as well:

This ElectroCookie stuff is good value!

Electronics Project #7: ICL8038 Monolithic Function/Signal Generator Kit Build and Test | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

Silly Job Title: Buzz Boss

In this video I build and test this kit I purchased from AliExpress: ICL8038 Monolithic Function Signal Generator Module Sine Square Triangle Signal Generators DIY Welding Practice Kit.

My notes are on my wiki: ICL8038.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Swann & Morten Handle For No. 10 10A 11 15 15A Scalpel HandleThis is an image of the product.

Let’s go shopping!

Mail Call #4: More Loot from AliExpress and eBay! | Learning Electronics In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I receive the following equipment:

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

RELIFE RL-007GA Solder LugsThis is an image of the product.notes

Let’s go shopping!

New Book Teardown #5: Electrical Engineering 101 3rd Edition (2011) | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I take a look at Electrical Engineering 101: Everything You Should Have Learned in School…but Probably Didn’t 3rd Edition written by Darren Ashby and published in 2011.

In the book the author mentioned that they used to write for chipcenter.com which appears to have since been taken over by EE Times. ChatGPT provided more information.

The author also mentioned Mathcad. I’m planning to check that out over here: https://www.mathcad.com/

And some terms which came up (ChatGPT explains further):

Vcc
Voltage at the collector
Vee
Voltage at the emitter
Vdd
Voltage at the drain
Vss
Voltage at the source

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pcs Releasable Cable OrganizerThis is an image of the product.

Let’s go shopping!

Mail Call #3: Even More Cheap Stuff from China! Thanks AliExpress! | In The Lab With Jay Jay

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I open up another bag of stuff I ordered from AliExpress during their recent sale.

This is the bulk stuff I cover in this video:

And this is the equipment I cover in this video:

Yum Cha 3pcs Drill Scrub BrushThis is an image of the product.notes
Yum Cha 6pcs Wire BrushThis is an image of the product.notes
Yum Cha 10pcs Blue Microfiber ClothThis is an image of the product.notes
Yum Cha 10pcs Magic Foam SpongeThis is an image of the product.notes
Yum Cha Universal Handheld Wire StripperThis is an image of the product.notes
Yum Cha 4pcs 30mm Deep Hole PenThis is an image of the product.notes

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Oloey Safety GogglesThis is an image of the product.notes

Let’s go shopping!

Extra Content #11: Cleaning Rust Off Handheld Wire Stripper Using Dremel Rotary Tool and WD-40

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I clean the rust off my new Yum Cha Universal Handheld Wire Stripper using my Dremel 4300 Rotary Tool and WD-40 Specialist High Performance Silicone Lubricant.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

YIHUA 938D Soldering TweezersThis is an image of the product.notes

Let’s go shopping!

Unboxing #12: Unboxing and Demo of OULLX NSS-681HDMI-RJ45 Cable Tester from AliExpress | In The Lab

Posted on by
Reply

This post is part of my video blog and you can find more information about this video over here.

You can support this channel on Patreon: patreon.com/JohnElliotV

In this video I unbox the OULLX NSS-681HDMI-RJ45 Cable Tester from AliExpress and compare it with the Ampcom Automatic Network Cable Tester also from AliExpress.

OULLX NSS-681HDMI-RJ45 Cable TesterThis is an image of the product.notes
Ampcom Automatic Network Cable TesterThis is an image of the product.notes

Note that the Ampcom is advertised as the ANENG M469D on AliExpress, but that’s not actually what you get. The Ampcom model that you do get seems to work well enough, but I would recommend the OULLX NSS-681HDMI-RJ45 because it’s cheaper and can do HDMI in addition to Ethernet.

Thanks very much for watching! And please remember to hit like and subscribe! :)

Following is a product I use picked at random from my collection which may appear in my videos. Clicking through on this to find and click on the green affiliate links before purchasing from eBay or AliExpress is a great way to support the channel at no cost to you. Thanks!

Yum Cha 100pc Titanium Plated Drill BitsThis is an image of the product.notes

Let’s go shopping!